Federal battery rebate is live: around 30% off your invoice. Already cut twice in 2026, next cut 1 January 2027. ≈30% federal rebate live, next cut 1 Jan 2027 See the step-down schedule

Every system, on the same terms

Usable capacity, what you have to buy alongside it, what survives a blackout and how much capacity the warranty still guarantees in ten years. Filter by what matters to your home, then put three side by side.

Accredited installers Part of the Why Solar group, est. 2019 35+ years combined experience No spam, ever
The systems

Nine systems we can stand behind.

Chosen on how widely they are installed in Australia and on whether we could get the manufacturer's own datasheet and warranty documents. Filter by what your home actually needs, then send up to three to the comparison.

Narrow it down

Showing 9 of 9 systems

Sungrow SBR

Sungrow

The high-volume value pick: 3.2kWh LFP modules stacked behind a Sungrow hybrid inverter.

Usable capacity
6.4 to 25.6kWh, in 3.2kWh steps
Continuous output
9.6kW
Backup
Whole home
Existing solar
Needs its own inverter

$6,000 to $9,000Estimate

A typical 9.6 to 16kWh stack with the Sungrow hybrid inverter included, installed, after the federal discount.

Read the review

GoodWe Lynx Home F G2

GoodWe

GoodWe’s main high-voltage battery line: 3.2kWh modules, 2 to 9 per tower, behind a GoodWe hybrid.

Usable capacity
6.4 to 28.8kWh, in 3.2kWh steps
Continuous output
4.48kW
Backup
Selected circuits
Existing solar
Needs its own inverter

$6,000 to $9,500Estimate

A 12.8 to 16kWh tower with a GoodWe hybrid inverter, installed, after the federal discount.

Read the review

GoodWe ESA

GoodWe

GoodWe’s all-in-one: power module plus stacked battery, with 63A whole-home backup and no separate gateway.

Usable capacity
5 to 48kWh, in 5kWh steps
Continuous output
11kW
Backup
Whole home
Existing solar
Needs its own inverter

$7,000 to $10,500Estimate

A 16kWh ESA stack installed, after the federal discount, backup included.

Read the review

AlphaESS SMILE G3

AlphaESS

A single-phase or three-phase system with a purpose-built AC-coupled variant (B5) for homes that already have solar.

Usable capacity
9.3 to 37.2kWh, in 9.3kWh steps
Continuous output
5kW
Backup
Selected circuits
Existing solar
Can retrofit

$7,000 to $11,000Estimate

A 9.3 to 13kWh single-phase system installed, after the federal discount.

Read the review

FoxESS CQ7

FoxESS

Large 6.96kWh modules at 100% depth of discharge, from the fastest-growing storage brand in Australia.

Usable capacity
13.92 to 97.44kWh, in 6.96kWh steps
Continuous output
9.22kW
Backup
Selected circuits
Existing solar
Can retrofit

$7,500 to $11,000Estimate

A typical 10 to 14kWh FoxESS system with inverter, installed, after the federal discount.

Read the review

BYD Battery-Box Premium HVM

BYD

A battery-only tower that pairs with hybrid inverters from many brands, which makes it the flexible choice for a retrofit.

Usable capacity
8.28 to 22.08kWh, in 2.76kWh steps
Continuous output
7.65kW
Backup
Selected circuits
Existing solar
Needs its own inverter

$6,500 to $12,000Estimate

A 13.8 to 16.6kWh tower including a hybrid inverter where one is needed, installed, after the federal discount.

Read the review

Sigenergy SigenStor

Sigenergy

A stackable tower where inverter, battery modules and an optional EV charger clip together. Australia’s best-selling home battery of 2025.

Usable capacity
5.2 to 46.8kWh, in 5.2kWh steps
Continuous output
2.5kW
Backup
Whole home
Existing solar
Can retrofit

$8,000 to $13,500Estimate

A typical single tower of roughly 8 to 16kWh installed, after the federal discount, excluding the backup gateway.

Read the review

Tesla Powerwall 3

Tesla Powerwall

An all-in-one battery with a 20kW solar inverter built in, aimed at homes putting in solar and storage together.

Usable capacity
13.5kWh
Continuous output
11.04kW
Backup
Whole home
Existing solar
Needs its own inverter

$10,000 to $13,000Estimate

One 13.5kWh unit installed, after the federal discount, excluding the Backup Gateway and any switchboard work.

Sungrow SBH

Sungrow

The larger Sungrow line: 5kWh modules, 10 to 40kWh per stack, for high-use or three-phase homes.

Usable capacity
10 to 40kWh, in 5kWh steps
Continuous output
25kW
Backup
Whole home
Existing solar
Needs its own inverter

$11,000 to $16,000Estimate

A 20 to 25kWh stack with hybrid inverter, installed, after the federal discount. Above 14kWh usable the rebate drops to roughly 60% of the full rate, which is already reflected here.

Read the review

About this catalogue. 9 systems, 96% of fields verified against a primary source, last checked 20 October 2026. Prices are indicative installed estimates after the federal discount, from public sources. They are not quotes and we hold no job-price data. Where we could not establish something, the record says so rather than leaving a blank. Compare any three or answer six questions for a shortlist.

A home battery, hybrid inverter and switchboard mounted together on the exterior wall of an Australian house
This is the part most comparisons leave out. A battery rarely arrives alone: the system on this wall is a switchboard, a hybrid inverter and the battery itself. Which of those you already own is the single biggest swing in what an installation costs, which is why the catalogue above says for every system what you have to buy alongside it. Illustrative image, generated. Not a photograph of a specific product or install.
By brand

The leading home battery brands.

Background on each manufacturer: what they are known for, the model lines they sell in Australia and indicative pricing. We stay brand-neutral and match you with an installer who fits the right battery to your home.

Common questions

The catalogue, explained.

Why only nine systems?
Because these are the ones we have read the datasheets and warranty documents for. Larger comparison tables exist and list well over a hundred variants, which is genuinely useful for breadth. We would rather hold fewer records where every figure has a source and a date against it, and grow the list as we verify more.
Are these the batteries you install?
They are the systems most installed in Australia from the brands we review, chosen on market presence and on whether we could obtain primary documentation. We stay brand-neutral: we match you with an installer who fits the right system to your home rather than pushing one product. My Home Battery is part of the Why Solar group, and installation enquiries go to the group first.
What do the labels on each figure mean?
Confirmed means we read it in a manufacturer datasheet, warranty document or regulator notice, and the source is linked. Estimate means it is our figure from several public sources, which is always true of installed prices. Not established means we could not verify it and are showing the gap rather than filling it.
Does the brand change my rebate?
No. The federal Cheaper Home Batteries discount and your state incentive apply to any eligible battery. What changes is the after-rebate price, which follows the usable capacity and the system you choose. Above 14kWh usable the federal rate drops, which is why bigger is not always better value.
Free, and no obligation

When you are ready,
we are here.

Work out your real after-rebate price and likely payback, then get matched with one vetted installer. Your journey, your pace.

It takes about two minutes, it costs nothing, and you are matched with one installer, never five.
Beat the 4-9pm peak Free rebate check, one installer